The NVIDIA® Jetson™ SerDes Sensor Interface card is an add-on for the NVIDIA Jetson AGX Orin™ and AGX Xavier™ Developer Kits.  The card supports both Texas Instruments FPD-Link™ III and Analog Devices (former Maxim Integrated) GMSL2 deserializers.  Connect multiple tethered sensors to the powerful NVIDIA Jetson embedded platform. A direct MIPI CSI-2 connection allows you to interface sensors directly to the Jetson Developer Kit.  Use with camera modules from D3. Use this kit for benchtop evaluation and rapid prototyping. Learn more about product development with D3.

Additional information

Lead Time

1 Week

Volume Pricing

Not available

Compatible Hardware

DesignCore®Camera Modules
Buy: https://www.d3engineering.com/product-category/camera-modules/?fwp_compatible_processor_family=nvidia
Learn More: https://www.d3engineering.com/solutions/camera-modules/

All pricing is for domestic orders to the U.S. Any international orders may result in different pricing.
SKU: 1001790 Category: Tags: ,

Additional Product Information


  • 4x FPD-Link™ III Input Channels
  • 2x GMSL2 Input Channels
  • 1x direct MIPI CSI-2 Input Channel
  • Power-over-Coax Connection
  • Interfaces to NVIDIA Jetson AGX Xavier & AGX Orin Developer Kits

Supported Sensors & Platforms


  • Camera Monitoring Systems
  • Industrial Vehicle Systems
  • Machine Vision
  • Robotics
  • Autonomous Machines


Read the DesignCore NVIDIA Jetson SerDes Sensor Interface Card Data Sheet  for additional information and product specifications.

Development Services

Get to market fast with D3 Engineering Product Development Services

Purchase of a DesignCore® kit gives you a license to evaluate the technology and use it as a platform for product development. Our Design Services team can help, using DesignCore platforms as reference designs for your product development, to reduce risk and accelerate time to market.

We can also help you integrate a DesignCore design directly into your product for a license fee. Finally we can supply part or all of your final system as original device manufacturer (ODM) products. DesignCore kits can be used to evaluate these ODM products.

Learn More


Q: Does the SerDes Interface Card directly interface with the Jetson AGX Xavier Developer Kit and AGX Orin Developer Kit?

A: The camera connector that is on the Jetson Xavier and Orin Developer Kits is the same that is also on the TX2 Developer Kit (which this product was originally designed for) so from a pinout and functionality standpoint, yes.  Since the Jetson Xavier/Orin Developer Kits were produced after D3 made the SerDes Interface Card, the board hangs off the edge of the developer kit and is best used for desktop prototyping.

Q: What software and source code is provided with the SerDes Interface Card?

A: D3 provides the driver source code and a simple capture/display demo for supported camera modules.  See “supported sensors.”